1～15 item / All 63 items
It detects when someone enters the detection area of the passive sensor.
An example of intrusion prevention measures within the shrine grounds using outdoor passive sensors; it detects when someone enters the detection area of the passive sensor.
It sensitively detects temperature changes caused by body heat, such as that of humans.
The IR30 series is equipped with a newly developed mirror that creates a high-density detection area without blind spots. Additionally, the 2x2 hyper 4-element configuration enhances human detection accuracy and achieves stable monitoring.
Detect drones within a maximum radius of 35 km, identifiable and trackable using AI.
● Detection range: Maximum radius of 35km, 360 degrees *Verified by the Canadian Department of National Defence ● Identifies and tracks the characteristics of radio waves emitted by drones using AI Identification accuracy: 99.9% Maintains a library of over 450 drones ● Capable of classifying detected drones (continuous tracking, no tracking needed, etc.) ● Simultaneous detection across six frequency bands: 433MHz/868MHz/915MHz/2.4GHz/5.2G/5.8G ● Set up on a tripod or vehicle in 5 minutes ● Additional provision of jamming devices (optional) *There is also a portable drone detection passive sensor (detection range < 7km) For detailed specifications, please refer to the brochure.
Ideal three-dimensional detection sensors for detecting remaining occupants and ensuring safety in multi-story parking garages.
■Capturing Far Infrared Energy Emitted by Humans The passive sensor (PA-5312PA) detects the difference between far infrared energy emitted from objects such as walls and floors and that emitted from the human body with high sensitivity, outputting a signal. It is an ideal three-dimensional detection sensor for detecting residual individuals and ensuring safety in tower parking-style multi-story parking lots. ■New Fuzzy Processing Adoption For the first time in the world, fuzzy theory has been adopted in a passive sensor. The two outputs from the newly developed dual twin elements are processed by the CPU to separate the temperature difference and shape difference between the detected object and the background, allowing for accurate determination of whether the detected object is a human using fuzzy theory. It is hardly affected by phenomena that are likely to cause false activation, such as small animals (like mice and cats), stray light, drafts, and noise disturbances. ■High-Density Detection Area Utilizing unique optical technology, a multi-parabola mirror has been adopted. This achieves an ideal detection area, allowing for high-density detection in three-dimensional space. Moreover, it is compatible for installation on ceilings and walls.
Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.
■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. This allows for the use of smaller power supplies, resulting in cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. This allows for the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. It is also suitable for renovations. ■Black Color Available for All Alert Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (without compromising aesthetics). The visibility and sensitivity of the LED are equivalent to the white version. ■Unique Alert Area Configuration Our unique optical technology creates a sharp alert area, providing effective detection performance with a movable mirror regardless of area settings. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for smooth and easy one-touch operation.
Standard passive sensor equipped with an auto-reset memory function.
■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm during standby by the blinking or lighting of the memory indicator (yellow). ● The memory indicator blinks for 3 minutes after the alarm is triggered, then continues to light for 47 minutes before automatically turning off. ● This function can be disabled via the mode selector. ■Easy Sensitivity Adjustment Function The sensitivity setting can be adjusted in four levels by switching the mode selector, allowing for optimal security based on the installation location. ● Adjustment range: 60%, 80%, 100%, 120% ■Device Abnormality Alarm Function In the event of damage or disconnection within the sensor's internal circuit or connection parts, the system will notify you of the abnormality through continuous alarm output and continuous lighting of the alarm indicator. ■Reliable Design Resistant to Radio Interference Effective measures against electrical noise entering from the line and airborne noise are implemented through circuit and mechanical design. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easy.
Round surveillance-type passive sensor equipped with cross-dual twin elements (8 elements).
■Equipped with the ultimate cross dual twin element As the ultimate cross dual twin element in passive infrared systems, it significantly improves reliability by clearing various issues related to sensitivity characteristics and zone directionality in round-the-clock surveillance. ■Ideal for three-dimensional surveillance of large spaces By installing it in the center of the ceiling, one unit can cover an area of approximately 115m² (height: 3.6m × 12m) with 33 pairs of sensitive zones (heat detection zones), allowing for cost reduction in security. ■ASC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the body temperature of intruders. ■Reliable design resistant to radio interference By adopting a unique N.E. method in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Alarm memory function By adding control contacts externally to the sensor, it is possible to confirm the activated sensor through the illumination of a display light.
It can be widely used for activating various devices such as security systems, video cameras, and lighting.
■Thin and Compact Design With a protrusion of 45mm from the ceiling and a diameter of 120mm, this thin and compact design fits well in any location. ■Three Types of Detection Areas Thanks to the lens exchangeable optical design, you can choose the most suitable pattern from three types of detection areas (surface detection, three-dimensional detection, line detection) based on the installation location. (Note: The line detection pattern requires an optional exchange lens.) ■Easily Switchable Detection Area Direction The direction of the detection area can be changed according to the installation location by adjusting the position of the cover. ■Ability to Eliminate Detection Areas Based on Installation Location (for Surface and Three-Dimensional Detection) The area divided into five rows can be eliminated one row at a time by attaching the included mask sheet to the cover. ■Convenient Features and User-Friendly Design ● A count switch allows you to select a detection mode suitable for the installation environment (only for three-dimensional detection). ● An ON/OFF switch can keep the operation indicator light off even during human detection. ● Equipped with a low power voltage alarm function that notifies you of a drop in power supply voltage. ● Convenient attachments for wall mounting: BL-5000, BCW-401 (sold separately) are also available.
180° warning wall-mounted passive sensor
■180° Super Wide Area With high-precision twin elements (×2), it provides three-dimensional surveillance over a horizontal 180°. ■Surveillance Area Adjustment Function The vertical angle can be independently adjusted in five levels for every 90° to the left and right. ■Low Power Voltage Abnormality The CPU constantly monitors the power supply voltage provided to the sensor. If the power voltage drops below a certain level, an abnormality alarm is triggered. ■Device Abnormality In the unlikely event of a circuit failure inside the sensor, an abnormality alarm is triggered. ■Others ● Equipped with an alarm indicator light for convenient operation confirmation. (During alarm: red LED lights up, can be turned off with a switch) During warm-up: blinks for about 1 minute ● Built-in switchable count function. (2 times, 4 times) ● Surveillance area can also be set directly beneath the sensor.
Passive sensor for wall and corner installation with rich features.
■ Adoption of Fuzzy Theory The two outputs from the newly developed dual twin element are divided into two pieces of information: the temperature difference and shape difference between the detection object and the background, which are detected by the CPU. Using fuzzy theory, it accurately determines whether the detection object is a human or a small animal and outputs an alarm. Even when phenomena that are likely to cause malfunctions, such as small animals (like mice), stray light, drafts, and external noise occur, the dual twin effect ensures that there is almost no impact. ■ Combined 3D and Area Surveillance By operating the mode selector inside the sensor and changing the lens, it can also be used for area surveillance. The surveillance area is effectively monitored up to 16m for 3D surveillance and 20m for area surveillance. ■ Abnormality Alarm Function While the sensor is in a surveillance state, it monitors the next functions through its built-in program. If an abnormality is detected, it continuously outputs an alarm and notifies of the abnormality with an alarm indicator light. ■ Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm by the blinking or lighting of the indicator light.
Slim and compact wall-mounted passive sensor
■Slim and Compact This sensor is slim and compact, making it unobtrusive even when mounted on walls or pillars. ■Wide Variation The alert area comes in two types: wide area and long area, allowing for flexible use as needed. The wide area can be adjusted to two patterns based on the room you want to monitor: an 80° area (maximum length 8m) and a 48° area (maximum length 12m), enabling efficient and effective monitoring without waste. Switching between them is easy with a one-touch operation. ■Twin Elements Adopted The thermal elements, which are essential to the sensor's performance, are of the twin type, and their stable performance has already been proven. ■Operation Indicator Light (Red LED) You can check the operational status with the indicator light (red LED). There is also a convenient feature that allows the light to be turned off while in alert mode. ■Easy Maintenance It is set to the appropriate sensitivity, so there is no need for troublesome sensitivity adjustments. Additionally, you can monitor the sensitivity level with a check pin for easy maintenance. ■Tamper Switch Equipped with a tamper switch that outputs an alarm signal if the cover is removed. This feature is effective in preventing tampering.
Passive sensor for installation on door frames and small walls, ideal for monitoring entrances, exits, and passageways.
■Optimal for Spot Surveillance A type of passive sensor that can be installed on door frames and small walls in entrances and corridors to catch intruders. With a depth of only 40mm, it is unobtrusive. ■Smart Design A simple and smart design composed of straight lines. It matches well with interior decor and does not create a sense of discomfort. ■Surveillance Area Switch The switch allows for easy one-touch switching between wide and narrow areas depending on the size of the monitored location (entrance or corridor width). * Wide Area: Height 2.5m, Width 1.5m * Narrow Area: Height 2.5m, Width 0.7m ■Surveillance Area Angle Adjustment Lever Depending on the situation of the monitored location, the angle of the surveillance area can be adjusted up to 35° from vertical. Fine adjustments after installation can also be made smoothly. ■No Sensitivity Adjustment Needed It is pre-adjusted to the appropriate sensitivity, making it maintenance-free with no need for sensitivity adjustments. ■User-Friendly Design ● The power supply voltage ranges from DC10.5 to 30V (no polarity). ● Operation confirmation LED (red LED lights up during alarm).
Outdoor and indoor passive sensor that significantly reduces missed detections and malfunctions by adopting a unique triple mirror method and signal processing technique.
■Triple mirror sensor that forms a unique area It incorporates three sets of optical units within the sensor. This new type of passive sensor is equipped with twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles an outdoor light, and the internal mirrors can be adjusted to modify the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false alarms caused by small animals By adopting independent detection sections for each mirror, it reduces false alarms caused by small animals such as cats through signal processing. Furthermore, by using the pet mode, it can also cancel out medium-sized dogs (approximately 50 cm in height), allowing it to be used in homes with pets. Additionally, by installing a bird stopper on the top, it becomes less attractive to birds, significantly reducing unexpected false alarms.
Outdoor and indoor passive sensor that significantly reduces missed reports and malfunctions by adopting a unique triple mirror system and signal processing method.
■Triple mirror sensor that forms a unique area Equipped with three sets of optical units, this new type of passive sensor features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, its design resembles that of an outdoor light, and the internal mirrors can be adjusted to modify the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false alarms caused by small animals By adopting independent detection units for each mirror, the sensor reduces false alarms caused by small animals such as cats through signal processing. Furthermore, by using the pet mode, it can also cancel out medium-sized dogs (approximately 50 cm in height), allowing it to be used in homes with pets. Additionally, by attaching a bird stopper to the top, it becomes less attractive to birds, significantly reducing unexpected malfunctions.
Wide-ranging, long-distance areas can be monitored in three-dimensional or surface surveillance types.
■Wide-range, long-distance surveillance area The unique surveillance area can monitor a wide range and long distance, with a three-dimensional surveillance type capable of monitoring up to 30m and a surface surveillance type up to 50m. ■Installable outdoors and indoors It can be installed not only outdoors but also indoors. Since it is installed on one side only, it can easily provide surveillance even in places where opposing infrared sensors cannot be installed. ■Robust housing case Adopting a housing case made of AES resin, it has improved impact resistance and weather resistance. There is less concern about deterioration from direct sunlight and wind and rain outdoors, and the standard steel plate long hood reduces the impact of bird droppings. ■Rainproof structure Even in places exposed to wind and rain, such as under eaves of buildings or on self-supporting poles, the weather-resistant packing structure prevents water intrusion. (When installing with exposed wiring, please use the included waterproof bushing or conduit.) ■Functions that assist in operation and inspection after installation ●Equipped with a sighting device A sighting device is included to easily set and adjust the surveillance area. ●C contact output The alarm contact uses a long-lasting, silent, non-voltage semiconductor contact to form the C contact.
